Micro Film

Studio Light1. This is camcorder professional LED camera light. 2. Mini design, easy to take in pocket and light for phone photography or DSLR camera photography. 3. Include independent power switch and keep the same brightness out when switch it on again. 4. Support 4 x AA batteries (batteries not included) power input, more convenient to use. 5. Support external power input (Type-C port), suitable for long time use. 6. Built-in 104 pieces high quality LED beads. 7. Rotating the switch can adjust the brightness without filter plates, suitable for a variety of photography atmosphere. 8. Highly efficient, power-saving, low energy consumption. 9. Can be fixed in the camera hot shoe socket, use on professional light frame or camera tripod. 10. With dual cold shoes slots, can install microphones or cellphone. 11. With a 1/4 inch female screw for Canon, Nikon, Sony, and othe Camcorder. In additional, it could be used on a 1/4 inch tripod to help Phone owner to take wonderful videos and photos.Microphone1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity 2. Load impedance: <0.68Kohm 3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones 4. Microphone type: electret condenser microphone 5. Microphone specification: 14*6.5mm 6. Directivity: Single point 7. Frequency response: 20-20000Hz 8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa). 9. Signal to noise ratio: >65DBSPL 10. Test voltage: 1.5VVlogging Rig1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A good tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide. 6. Bluetooth control: The top of the hand grip imitates the camera shutter design and adds Bluetooth control to take pictures.(Bluetooth operation tips: Long press for 3-5 seconds to turn on Bluetooth, and after the Bluetooth of phone is turned on, find the search name "PULUZ" to connect)Mini Tripod Mount1. Lightweight and portable design, only 150g. 2. Made from thick and sturdy plastic, perfect for shooting action sports footage from a fixed angle, but can also be used as a hand grip to shoot video or photos with your action camera, compact camera or smartphone. 3. The new push-button mechanism enables you to position and lock the ball head in one rapid, intuitive movement. Pushing the button releases the ball joint to move freely. When the button is released, the ball is locked automatically in the selected position. 4. With this solid construction, it provides a secure base in every situation and the rubber feet guarantee a stable and slip-free on any surface. 5. 1/4 inch universal screw, compatible with Canon/ Nikon/ Sony/Pentax compact cameras and other light weight DSLRs with 1/4 inch thread; suitable for GoPro 5/4/3+, and iPhone, Galaxy, Huawei, Haweel and other smartphones. 6. Load: 1kg. 7. Size: 17.3x5.5x4.3cm.Package List1. Vlogging Rig x 1 2. Microphone x 1 3. Tripod Mount x 1 4. Cold Shoe Tripod Head x 1 5. Video Light x 1 6. Type-C Cable x 1 6. 3.5mm Audio Adapter Cable x 2 7. Color Package Box x 1

Read more less

Aputure V-Matte Box creatively and flexibly change light shaping, good at blocking light. And more- Simple and elegent design, industry-standard, barn doors removable for easy portability, height adjustable to fit various sizes of cameras. 1) Removable barn doors for easy portability 2) Adjustable height to fit different sizes of the camera 3) Fits lenses from 43mm to 77mm 4) Using industry-standard 15mm rods(60mm pitch-row) 5) Simple and elegant design 6) Material: Metal & ABS 7) Weight: 210g

Read more less

Features1. This mini desktop camera slider car will be very helpful when you want to take photos from different angle by moving your camera 2. Main body is made of metal, sturdy enough to carry you DV and DSLR cameras. 3. Precision extruded industrial grade aluminum construction. 4. High quality durable and sealed bearings on both sides of each wheel. 5.Lightweight and durable construction.Specifications1. Material: Plastic + Aluminum 2. Compatible Camera Model: Universal 3. Socket size: 1/4 inch 4. Functions: This dolly car can help you create more dynamic tabletop shots 5. Features: Features 3 x 1/4 screw positions for mounting an optional ball head or articulating arm etc.; Constructed of aluminum with roller-blade style wheels and steel ball-bearings; Front and rear wheels adjust to allow straight or circular movements and glides 6. Size: 20 x 13.5 x 6.5cm

Read more less

1) Compatibility: Digital Camera 2) Type: Holder 3) Weight: 0.55kg 4) Material: Aluminium 5) Product Features: practical, simple, light weight, easy to carry 6) Packing List: 1 x Camera car

Read more less

Features1. Made of hard anodized aluminum and plastic for durability 2. Plenty 1/4 inch and 3/8 inch mounting holes for attaching other accessories 3. Coming with the 15mm rods for mounting follow focus, matte box, microphones, etca?| 4. Including top carry handle with soft rubber, for convenient carry 5. With enlarger sizer fit for 5D III & D800 6. Ideal for professional or amateur cameraman/filmmakerPackage List1. Handle x1 2. Cage x 1 3. 15mm conduit (24.5cm) x 2 4. 1/4 screw x 4 5. Allen wrench x 2 6. Curved base x 1

Read more less

1. Letspro SK-500 slider, made of carbon fiber, is an unique slider with adjustable plate. 2. It's with new structure, selected materials, easy to carry. Specila design makes sure of better stability and longer time for hand held. It is the real carryon stabilizer. 3. Allow to adjust the front, back, left and right balance. After connecting camera and quick release plate, lacate the blanece according to the weight of the camera. To avoid the inspiration of the carbon fiber handle comes from body mechanics. Not only can it adjust the direction, but also can get more extension function with the matched accessories. The covered foam rubber, makes the handle more soft and flexible. also with the functions of sound absorption and heat insulation. 4. The precise mark on the plate. With the memory mark, it makes the further installation fast and accurate. Be more stable and safe with the convenient button locking system. 5. The design of 3 groups counters weight for the base, enhance the stability and balance, also can used as the 3-legs support base. 6. KS-500 Standard counterweight includes 3 groups: 146g, 47g, 37g. Choose the counter weight according to your camera. ( We also provide counter weight so you can buy more). 7. Adopt the unique 3-legs fast locking system During the use, we only need to open or close the 3-legs then, twist the locking button, then fast lock the 3-legs. 8. Packing List: - 1*Stabilizer - 1*connecting small parts - 1*soft backpack

Read more less

Features1. This follow focus use L installation plate and the camera tripod screw holes at the bottom of the connection, do not need to be fixed on the catheter, can be used directly 2. Professional touch, precise focusing 3. The unique damper design 4. Install easily 5. Great convenient cameraman fast accurate focus, make the film and television shooting more perfect and efficient

Read more less

Features1. This follow focus use L installation plate and the camera tripod screw holes at the bottom of the connection, do not need to be fixed on the catheter, can be used directly 2. Professional touch, precise focusing 3. The unique damper design 4. Install easily 5. Great convenient cameraman fast accurate focus, make the film and television shooting more perfect and efficient

Read more less

Features1. Simple design, easy to use 2. Non-slip pattern designed handle, stable to use 3. 100% brand and high quality 4. Professional camera protective equipment,easy to install 5. Stabilize the camera movement and reduce shaking 6. Compatible with most DSLR cameras

Read more less

Features1. 100% brand and high quality, durable 2. Easy to install and uninstall 3. Ergonomic design, can adjust the angle and position as need, top with level meter 4. Can be extended more features and functions. 5. Applicable with a 1/4 inch screw digital SLR cameras and camcorders 6. Provide you a stable and accurate video capture platform 7. You can install video capture series of related accessories 8. Fixed cameras on the tripod 9. The use of international standards, can be mounted 15mm diameter rail

Read more less

Features1. 100% brand and high quality, durable 2. Easy to install and uninstall 3. Ergonomic design, can adjust the angle and position as need 4. Can be extended more features and functions. 5. Applicable with a 1/4 inch screw digital SLR cameras and camcorders 6. Provide you a stable and accurate video capture platform 7. You can install video capture series of related accessories 8. Fixed cameras on the tripod 9. The use of international standards, can be mounted 15mm diameter rail (pipe center distance 60mm)

Read more less

Features1. Simple design, easy to use 2. The non-slip pattern designed handle, stable to use 3. 100% brand and high quality 4. Professional camera protective equipment, easy to install 5. Stabilize the camera movement and reduce shaking 6. Compatible with most DSLR cameras

Read more less

Features1. International standard 1/4 camera screw,compatible with most SLR camera/DVR 2. Built-in lens bracket support,effective support for lens and protect cameras. 3. The distance between the camera and lens bracket connection can be adjusted up and down,before and back. 4. Can be used on a tripod, bracket,matte box, as well as follow focus and various combinations of DIY. 5. High strength aluminum alloy production technology, strong and durable. 6. Adopt international standard 15 mm tube, double tube is more stable, standard thread, can be unlimited extension. 7. Each part can be easily uninstall and restructuring.

Read more less

The is a video stabilizing system designed to reduce shake and stabilize video on cameras and camcorders weighting up to 2.1 lbs (0.95kg). The Steady Vid EX features aluminum construction, comfort grip handle, super-smooth gimbal, polished chrome counter-weight, sprit level, rubberized camera mount and thumb stabilizer. The Steady Vid EX is the most affordable full-featured stabilizer on the market. Features 1. Supports digital cameras and camcorders up to 2.1 lbs 2. Comfort grip handle 3. Super gimbal for smooth, accurate motion 4. Polished chrome counter-weight

Read more less

Features1. International standard 1/4 camera screw, compatible with most SLR camera/DVR 2. Built-in lens bracket support, effective support for lens and protect cameras. 3. The distance between the camera and lens bracket connection can be adjusted up and down,before and back. 4. Can be used on a tripod, bracket, matte box, as well as follow focus and various combinations of DIY. 5. High strength aluminum alloy production technology, strong and durable. 6. Adopt international standard 15 mm tube, double tube is more stable, standard thread, can be unlimited extension. 7. Each part can be easily uninstall and restructuring.

Read more less

1. Peaking focus assist in red line 2. 5D II camera mode 3. Check Field: Red, Green, Blue,Mono 4. Image Flip: U/D, L/R 5. Screen Marker: 80%, 85%, 90%, 93%, 96%, 2.35:1 6. Center Marker 7. 4:3 & 16:9 image adjustable 8. Pixel-to-Pixel 9. Image Freeze 10. Zoom-in

Read more less

About the product1. Brand new and high quality 2. It is versatile for HDV HDSLR film makers, especially for Follow focus users when taking photo or video, it can be used to mount LED light, flash or LCD Monitor on to your DSLR cage, HDSLR camera, rail rod (clamp) or shoulder mount rig. 3. It is 7 inches in length when fully extended. 4. Large center locking knob to lock all movements, variable friction and position. 5. Hot shoe adapter to fit camera and camcorder 6. 1/4inch screw adapter to fit lightstand, small flash, LED light & other accessories with 1/4 inch screw sockets 7. Ideal gear for mounting accessories exactly at any angle you need.

Read more less

About the product1. High-strength aluminum alloy, lighter and more portable 2. Easy to operate, support a wide range 3. High-precision bearings, feel smooth, flexible operation 4. Professional design, 360 degree all-round stable shooting 5. Retractable stabilizer balance bar to adjust the length 6. Removeable damping weights, allow you to rearrnage weight as you wish

Read more less

Features1. It can be handheld or used with vest and shock absorption arm together 2. Unique 2 connection arms and one shock absorption arm, increases operation space and convenient to use 3. Exquisite workmanship, great shock absorption; Fine adjustment design, convenient to adjust the balance 4. Adjustable length, convenient to carry and use; Suitable for the camera within 1.5kg 5. High quality aluminum alloy, the juncture is equipped with ball bearing, flexible, anti-collision

Read more less

1. Simple design, easy to use 2. The non-slip pattern designed handle, stable to use 3. Compatible with most DSLR cameras 4. Professional camera protective equipment, easy to install 5. Stabilize the camera movement and reduce shaking 6. Note: The showing camera is not included

Read more less

Features1. High quality aluminum alloy grip, durable. 2. Non-slip design, and smooth design is no harm to your camera. 3. Adjustable and flexible. 4. Simple for work and convenient for installation. 5. Special used for follow focus. 6. Suitable for most shooting situations.

Read more less

Features1. 100% high quality and brand new 2. The main body is made of metal materials 3. Use of leverage can be installed columnar, plate or irregularly shaped surfaces 4. Calipers tooth is made of non-slip rubber, locked or open by screw-step control, very strong and stable 5. 1/4 inch and 3/8 inch screws hole 6. Recommend using on the diameter of 2-4.5cm bracket

Read more less

Features1. Fixed camera to reduce the handheld burden of photographer also to make the image normal for no shaking. At the same time, the bracket solves the problems of tired for a long time shooting. 2. It supports a variety of recording modes and changes. A. When the need for low-angle shooting, lifting to solve the low-angle shoot problem. B. It can be hand-held when in middle position to shoot, security and stability C. When shooting high, you can take the shoulder shooting mode, easy and simple D. When using a large video camera, you can adjust the shoulder distance freely. 3. Lightweight design. A. It can be put in any type of camera bags and easy to carry because the net weight is only 980g. B. With a variety of mounting interfaces, you can easily connect a video light, LCD monitor screen, magic arm, cage and other equipments for more photography joy. Widely used in SLR video cameras, hand-held video camera, etc. 4. Increasing the head and rail rod, it can directly match with follow focus, matte box, more convenient for low shoot, shoulder shoot, handheld shoot, hand-held low shoot, etc. 5. Suitable for Blackmagic Cinema Camera/ canon 5D MarkII/III / Canon 6D / 7D / NikonD90 / D300S / LUMIX GH2 / GH3 / SONY NEX5 / NEX7

Read more less

1. To provide you with a stable and accurate video capture platform 2. Ergonomic design, angle and position can be adjusted as needed 3. Installation of video capture series of related accessories 4. With a digital SLR camera and video camera with a 1/4 screw hole 5. Camera cage bottom with a 1/4 and 3/8 screw holes, can be installed on a tripod to use. 6. Cage with a quick release function, easy to install on the camera, the upper side of the porous design, standard camera screw holes 1/4" and 3/8" can be connected to various types of attachments, such as magic arm, monitors, microphones, etc. 7. Products can be used alone, also matched with other photographic equipment. 8. Increase matte box, easy to adjust the light. 9. Increase follow focus, making focusing easier and more convenient. 10.The cage instead of the original camera platform, can low shot, with better effect.

Read more less

1. This is a handheld stabilizer system designed to reduce shake and stabilize video on compact cameras up to 1.5KG 2. Comfortable handle grip 3. Lightweight and compact, very convenient to carry. 4. This compact hand held system takes away the need for tripods or dollys, giving videographers the ability to create smooth videos 5. This system is especially good for video cameras, video capable DSLR cameras and DVs

Read more less

1. High strength Aluminum manufacturing,more lighter and portable. 2. Compact, easy to operat, support wide range. 3. High precision bearing, feel smoothly, flexible operation. 4. Professional design, 360 degree all-round stability shooting. 5. Adjust the stabilizers stabilizer bar length scalable. 6. Can match professional vest shock absorption use.

Read more less

1. Enhance stability of video filming. 2. C-shaped design makes the device more practical and it is great for multi-angles filming. 3. Top with cold-shoe design allows to mount microphone or video light. 4. Bottom with a standard 1/4 slidable screw could lock the DSLR or camcorder to the stabilizer tightly. 5. Anti-skid foot design to be put on a platform. 6. Soft foam grip adds comfort and eases the long shooting fatigue. 7. With phone clamp, support smartphones width range: 5.2cm-7.8cm. 8. Constructed from high quality ABS, powerful and guaranteed.

Read more less

1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A fantastic tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide.

Read more less

1. Aviation aluminum and precision CNC process. 2. Hand grip: Hot shoe with different screw interfaces, can connect with different external device expansion, with anti-slide design. 3. Hot shoe: Frame with a hot shoe interface, easy to connect with external lighting and radio equipment. Convenient to use, no need magic arm. 4. A gripper for protection. 5. Base plate with up and down adjustable rail rod. 6. Comfortable ergonomic hand grip, can one handed shooting for stable image. 7. When handheld with a long zoom lens, adjust rod to support the cage. Three points fixed for easy stable shooting. 8. Matched with follow focus equipments, matte box, microphones and external monitors, can further improve the professional photography applications. 9. Compatible with Sony A7 & A7S & A7R, A7 II & A7R II & A7S II, A7R III & A7S III, A7R IV, A6000, A6500, A6300, Panasonic Lumix DMC-GH4 DSLR cameras. 10. Note: Only the stabilizer, the showing camera is not included.

Read more less

1. Aviation aluminum and precision CNC process. 2. Hand grip: Hot shoe with different screw interfaces, can connect with different external device expansion, with anti-slide design. 3. Hot shoe: Frame with a hot shoe interface, easy to connect with external lighting and radio equipment. Convenient to use, no need magic arm. 4. A gripper for protection. 5. Base plate with up and down adjustable rail rod. 6. Comfortable ergonomic hand grip, can one handed shooting for stable image. 7. When handheld with a long zoom lens, adjust rod to support the cage. Three points fixed for easy stable shooting. 8. Matched with follow focus equipments, matte box, microphones and external monitors, can further improve the professional photography applications. 9. Compatible with Sony A7 & A7S & A7R, A7 II & A7R II & A7S II, A7R III & A7S III, A7R IV, A6000, A6500, A6300, Panasonic Lumix DMC-GH4 DSLR cameras. 10. Note: Only the stabilizer, the showing camera is not included.

Read more less

1. Made of aluminum tube, lightweight and durable. 2. Dual handheld design, enable you to shift from one hand to two hands easily when shooting. 3. Non-slip Design: The dual handles are consisted by non-slip plastic material with patterns to increase friction; You can hold it tightly without worrying about the falling off due to enduring application. 4. Two 1/4-inch screw holes on the grip enable you to connect the monitor, bluetooth remote controller or any other accessories of your camera. 5. Specially designed for 3-Axis handheld stabilizer.

Read more less

1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A fantastic tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide.

Read more less

1. Material: Aluminum alloy, durable and sturdy. 2. With a 360 swivel head at the end of the magic arm makes you a comfortable use when you need any angle of the device. 3. This precise and durable designed magic arm with locking control knobs to release or enlarge the tension which can give all position movement. 4. Versatile for HDV HDSLR film makers, especially for follow focus users when taking photo or video, it can be used to mount LED light, flash or LCD Monitor on to your DSLR cage, HD SLR camera, rail rod (clamp) or shoulder mount rig.

Read more less

1. Material: Aluminum alloy, durable and sturdy. 2. With a 360 swivel head at the end of the magic arm makes you a comfortable use when you need any angle of the device. 3. This precise and durable designed magic arm with locking control knobs to release or enlarge the tension which can give all position movement. 4. Versatile for HDV HDSLR film makers, especially for follow focus users when taking photo or video, it can be used to mount LED light, flash or LCD Monitor on to your DSLR cage, HD SLR camera, rail rod (clamp) or shoulder mount rig.

Read more less

Features1. C-shape holder support stable DV shooting, makes your image more stable and clear; 2. Sponge handle can relieve the stress of long shooting, making it smooth; 3. Allows to adjust flash light position by installing internal screw on tripod; 4. Suitable for DSLR and small camcorder; 5. Soft cushioned grip; 6. Multi position mounting system; 7. Mounting shoe for microphone, flash unit and video lights; 8. Improves stability of your digital and video camera; 9. Easily mounts to tripod or monopod; 10. Non-slip rubber feetSpecifications1. Material: ABS + rubber + sponge + aluminum alloy 2. Socket Size: 1/4 inch 3. Load: 2.0 kg 4. Height: 22 cm 5. Dimensions: 20 x 8.8 x 21.7cm 6. Weight: 237g

Read more less

1) Material: Aluminum alloy + stainless steel + foam 2) Light and durable, convenient to carry 3) Max Load: 1.0 kg 4) Main Tray width: 6 cm 5) Handle Diameter: 3 cm 6) Reduce shake and stabilize video on compact cameras and lightweight camcorders up to 1.0 kg, features aluminum construction, comfortable handle grip, super-smooth gimbal, addable counter weight, spirit level, rubberized camera mount and thumb stabilizer. 7) Weight: 825g 8) Farmar weight: 300g 9) Size: 26x21x6.8cm

Read more less

1. High quality Carbon Fiber, the juncture is equipped with ball bearing, flexible, anti-collision. 2. It can be handheld or used with vest and shock absorption arm together. 3. Unique 2 connection arms and one shock absorption arm, increases operation space and convenient to use. 4. Exquisite workmanship, great shock absorption; Fine adjustment design, convenient to adjust the balance. 5. Adjustable length, convenient to carry and use; Suitable for the camera between 0.5 - 3kg. 6. The quick release plate can accept any camera with 1/4 inch screw.

Read more less

U/C Shape Stabilizer1. Enhance stability of video filming. 2. C-shaped design makes the device more practical and it is great for multi-angles filming. 3. Top with cold-shoe design allows to mount microphone or video light. 4. Bottom with a standard 1/4 slidable screw could lock the DSLR or camcorder to the stabilizer tightly. 5. Anti-skid foot design to be put on a platform. 6. Soft foam grip adds comfort and eases the long shooting fatigue. 7. Constructed from high quality ABS, powerful and guaranteed.Microphone1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity 2. Load impedance: <0.68Kohm 3. Fit any device that have 3.5mm MIC socket and hot shoe 4. Microphone type: electret condenser microphone 5. Microphone specification: 14*6.5mm 6. Directivity: Single point 7. Frequency response: 20-20000Hz 8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa). 9. Signal to noise ratio: >65DBSPL 10. Test voltage: 1.5V

Read more less

Studio Light1. This is camcorder professional LED camera light. 2. Mini design, easy to take in pocket and light for phone photography or DSLR camera photography. 3. Include independent power switch and keep the same brightness out when switch it on again. 4. Support 4 x AA batteries (batteries not included) power input, more convenient to use. 5. Support external power input (Type-C port), suitable for long time use. 6. Built-in 104 pieces high quality LED beads. 7. Rotating the switch can adjust the brightness without filter plates, suitable for a variety of photography atmosphere. 8. Highly efficient, power-saving, low energy consumption. 9. Can be fixed in the camera hot shoe socket, use on professional light frame or camera tripod. 10. With dual cold shoes slots, can install microphones or cellphone. 11. With a 1/4 inch female screw for Canon, Nikon, Sony, and othe Camcorder. In additional, it could be used on a 1/4 inch tripod to help Phone owner to take wonderful videos and photos.Microphone1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity 2. Load impedance: <0.68Kohm 3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones 4. Microphone type: electret condenser microphone 5. Microphone specification: 14*6.5mm 6. Directivity: Single point 7. Frequency response: 20-20000Hz 8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa). 9. Signal to noise ratio: >65DBSPL 10. Test voltage: 1.5VVlogging Rig1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A fantastic tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide.Package List1. Vlogging Rig x 1 2. Microphone x 1 3. Cold Shoe Tripod Head x 1 4. USB Cable x 1 5. Video Selfie Light x 1 6. 3.5mm Audio Adapter Cable x 2 7. Color Package Box x 1

Read more less

Ring LED1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle (The holder is not included). 2. The ring light is made of 40pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography. 4. 3 colors lighting mode adjustable brightness for your choose,you can adjust the color and brightness very easily, good brightness can be achieved without installing extra colorful filters. Three colors of soft natural light illuminate your beauty in different occasions. 5. The USB ports can be used with multiple devices, such as connect computer host, laptop, mobile power and USB charger. You will be able to enjoy LED ring light at any time free. 6. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc. 7. The function of heat dissipation: Metal shell, even if it is used for a long time,there is no need to worry that the lamp will be hot. 8. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.Vlogging Rig1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A good tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide.Ring LED Specifications1. Number of beads: 40pcs 2. Lamp bead model: 2835 3. Lamp brightness: 24-26lm 4. White light color temperature: 6500K 5. Warm white color temperature: 3200K 6. Power: 4-8W 7. Voltage: 5V 8. Indicates: Ra>82 9. Dimming range: 1%-100% 10. Shell material: aluminum 11. Dimensions: outer diameter 120mm. inner diameter 86mm 12. Power supply: USB port power supplyPackage List1. Ring LED Light x 1 2. Video Rig x 1 3. Cold Shoe Tripod Head x 1 4. 3.5mm Audio Adapter Cable x 2 5. Color Package Box x 1

Read more less

Ring LED1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle (The holder is not included). 2. The ring light is made of 40pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography. 4. 3 colors lighting mode adjustable brightness for your choose,you can adjust the color and brightness very easily, good brightness can be achieved without installing extra colorful filters. Three colors of soft natural light illuminate your beauty in different occasions. 5. The USB ports can be used with multiple devices, such as connect computer host, laptop, mobile power and USB charger. You will be able to enjoy LED ring light at any time free. 6. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc. 7. The function of heat dissipation: Metal shell, even if it is used for a long time,there is no need to worry that the lamp will be hot. 8. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.Vlogging Rig1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A good tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide.Ring LED Specifications1. Number of beads: 40pcs 2. Lamp bead model: 2835 3. Lamp brightness: 24-26lm 4. White light color temperature: 6500K 5. Warm white color temperature: 3200K 6. Power: 4-8W 7. Voltage: 5V 8. Indicates: Ra>82 9. Dimming range: 1%-100% 10. Shell material: aluminum 11. Dimensions: outer diameter 120mm. inner diameter 86mm 12. Power supply: USB port power supplyPackage List1. Ring LED Light x 1 2. Video Rig x 1 3. Cold Shoe Tripod Head x 1 4. 3.5mm Audio Adapter Cable x 2 5. Color Package Box x 1

Read more less

Parameter: 1. Screen size: 7 inch IPS 2. Resolution: 1920x1080p 3. Pitch: 0.07875 (H) x 0.07875 (W) mm 4. Screen ratio: 16:10 5. Input: HDMI 6. Output: HDMI 7. Input voltage: DC 7-24V Main features of the product: 1. Full HD 1920x1200, out of color display technology 2. High contrast: 1200:1, highlight: 2200cd/m2 3. 160 degree ultra wide-angle IPS good visual experience, all-round color reproduction display 4. Stylish ultra-thin design with only 25mm thickness 5. Lightweight and portable design is the good companion for camera stabilizer, rocker arm, camera recorder kit, handheld stabilizer, camera jack 6. Brightness histogram 7. Auxiliary focus (red, green, blue 3 color focusing color optional) 8. Pseudo-color 9. Overexposure prompt (zebra pattern) 10. Jiugongge 11. Audio column 12. Scan mode (underscan, overscan) 13. Image enlargement (automatic, 4x, 9x, 16x) 14. Deformation mode (1.3x, 2.0x, 2.0x mag) 15. Point to point 16. Center mark 17. Safety frame (80%, 85%, 90%, 93%, 96%, 2.35:1) 18. Proportional Markers (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1) 19. Marker line color (red, green, blue, white, black) 20. Monochrome display (black and white / red / green / blue) 21. Image flip (horizontal, vertical, horizontal & vertical) 22. Image freeze 23. Global zoom 24. Up/down/left and right zoom 25. Color temperature adjustment

Read more less

1. Full HD 1920x1200, out of color display technology 2. High contrast: 1200:1, highlight: 450cd/m2 3. 160 degree ultra wide-angle IPS good visual experience, all-round color reproduction display 4. Stylish ultra-thin design with only 18mm thickness 5. Lightweight and portable design is the good companion for camera stabilizer, rocker arm, camera recorder kit, handheld stabilizer, camera jack 6. Brightness histogram 7. Auxiliary focus (red, green, blue 3 color focusing color optional) 8. Pseudo-color 9. Overexposure prompt (zebra pattern) 10. Jiugongge 11. Audio column 12. Camera mode 13. Image enlargement (automatic, 4x, 9x, 16x) 14. Deformation mode (1.3x, 2.0x, 2.0x mag) 15. Point to point 16. Center mark 17. Safety frame (80%, 85%, 90%, 93%, 96%, 2.35:1) 18. Proportional Markers (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1) 19. Marker line color (red, green, blue, white, black) 20. Monochrome display (black and white / red / green / blue) 21. Image flip (horizontal, vertical, horizontal & vertical) 22. Image freeze 23. Global zoom 24. Up/down/left and right zoom 25. Color temperature adjustment

Read more less

Description:1. Material: aluminum alloy2. Size: 169x25.5x60.5mm3. Weight: 156g4. Function: external monitor, microphone, fill light, rabbit cage bracket, etc.5. Packing list: upper handle x1

Read more less

1. Material: Aluminum alloy2. Weight: 2 kg3. Double spheres, double openings, no dead ends4. It can be connected to mobile phones, fill lights, monitors, microphones and other equipment5. The platform can be rotated and moved, and the angle of the shooting equipment can be flexibly adjusted6. A-shaped aluminum alloy rotary knob, more susceptible to force

Read more less

1. Material: Aluminum alloy2. Suitable for all kinds of equipment with 1/4 interface, such as tripod. Can be connected to mobile phone clips, fill light, monitors, microphones and other 1/4 interface devices3. Compatible with various sports cameras4. One-piece body design, CNC processing, surface anodized anti-oxidation treatment, durable and convenient5. Packing list: main body x1+ allen wrench x1

Read more less

1. Material: Aluminum alloy2. Suitable for all kinds of equipment with 1/4 interface, such as tripod. Can be connected to mobile phone clips, fill light, monitors, microphones and other 1/4 interface devices3. Compatible with various sports cameras4. One-piece body design, CNC processing, surface anodized anti-oxidation treatment, durable and convenient5. Packing list: main body x1+ allen wrench x1

Read more less

1. Material: Aluminum alloy2. Suitable for all kinds of equipment with 1/4 interface, such as tripod. Can be connected to mobile phone clips, fill light, monitors, microphones and other 1/4 interface devices3. Compatible with various sports cameras4. One-piece body design, CNC processing, surface anodized anti-oxidation treatment, durable and convenient5. Packing list: main body x1+ allen wrench x1

Read more less