DJI Replacement Parts

1. Voltage: 2.1V DC2. Operating voltage range: 1.5~4.2V DC3. Rotation direction: CW/clockwise rotation, CCW/counterclockwise rotation4. Motor position: all directions5. Operating environment: -20-60 degrees Celsius, 10-90%RH6. Temperature: 20+/-2 degrees Celsius7. Humidity: (65+/-5%)RH8. Motor status: the output shaft is horizontal (the motor is fixed in the test fixture)9. Weight: about 5.5g10. Size: 85 x 20MM11. Cable length: 71mm (rear) 87mm (front)12. Specifications: forward black and blue lines, reverse black and blue lines13. Axial clearance: 0.05-0.3mm14. No-load speed: 28000+/-10%RPM15. No-load current: 200mA (MAX)16. Load speed: 20500+/-6%RPM (voltage 2.5V passenger blade 76mm-CW)17. Load current: 2.7+/-0.25A (voltage 2.5V, passenger-supplied blade 76mm-CW)18. Starting voltage: 0.8VDC (MAX) (rated load, shaft level)19. Dielectric strength: 5MQ (MIN) (add 100V DC voltage between the wire and the motor body.)

Read more less

1. Frequency: 5000-6000MHz 2. Gain: 3dbi 3. VSWR: 4. Polarization:RHCP 5. Axial Ratio: 0.7 6. Cable: RG141 7. Weight: 6.8g 8. Diamension: Total length: 60mm, cable length:45mm 9. Interface: RHCP SMA / LHCP RP-SMA

Read more less

1. Applicable models: for DJI Air 2S drone2. Camera:- Sensor 1 inch CMOS- Effective pixels: 20 million pixels; 2.4μm pixel size3. Lens:- Field of view: 88 degrees- Equivalent to 35mm format: 22mm- Aperture: f/2.8- Shooting range: 0.6m and above4. ISO range:- Video: 100-3200 (auto), 100-6400 (manual), 10-bit Dlog-M video, 100-800 (auto), 100-1600 (manual)- Photo: 100-3200 (auto), 100-12800 (manual)5. Still image size: 20MP, 5472×3648 (3:2), 5472×3078 (16:9)6. Still photography mode:- Single shot: 20MP- Continuous shooting: 20MP (continuous continuous shooting)- Auto exposure bracketing (AEB): 20MP, 3/5 bracketed frames, 0.7EV deviation- Timing: 20MP, 2/3/5/7/10/15/20/30/60s- Smart Photo (including HDR and HyperLight): 20MP7. HDR panorama shooting:- Vertical (3×1): 3328×8000 (W×H)- Wide angle (3×3): 8000×6144 (W×H)- 180 degrees (3 × 7): 8192 × 3500 (W × H)- Sphere (3×8+1): 8192×4096 (W×H)- JPEG/DNG (RAW)8. Video resolution:- 5.4K: 5472×3078 @ 24/25/30 fps- 4K Ultra HD: 3840×2160 @ 24/25/30/48/50/60 fps- 2.7K: 2688x1512 @ 24/25/30/48/50/60 fps- FHD: 1920×1080 @ 24/25/30/48/50/60/120 fps- MP4/MOV (H.264/MPEG-4 AVC, H.265/HEVC)9. Video bit rate: up to 150 Mbps10. Supported file systems: FAT32/exFAT11. Supported capacity: up to 256GB Micro SD card12. Digital zoom:- When recording 10-bit video and 120fps video, zoom recording is not available- 4K/30fps: 4x- 2.7K/60fps: 4x- 2.7K/30fps: 6x- 1080p/60fps: 6x- 1080p/30fps: 8x13. Gimbal: stable 3 axes (tilt, roll, swing)14. Mechanical range:- Tilt: -135 degrees to 45 degrees- Roll: -45 degrees to 45 degrees- Pan: -100 degrees to 100 degrees- Pan axis is not controllable15. Controllable range:- Tilt: -90 degrees to 0 degrees (default), -90 degrees to 24 degrees (extended)- Controllable speed (tilt): up to 100 degrees / s

Read more less

1. Rated voltage: 24V2. Signal type: CAN command, PWM3. Continuous current: up to 20A4. Total length with wires: about 34.4cm5. Weight: about 35g6. Size (LxWxH without wire): about 49.4 x 25.8 x 11.5mmFeatures:1. C620 brushless motor speed controller adopts 32-bit customized motor driver chip with magnetic field orientation control (FOC) technology to achieve precise control of motor torque, and M3508 DC brushless geared motor to form a powerful power package2. It can be used with RoboMaster Assistant software for parameter setting and firmware upgrade3. Strong power, compact size, high power density.4. Built-in multiple sensors, can automatically sense high temperature, broken wires and other abnormal conditions and timely alarm, quickly locate the fault, safer to use5. Simple setup, no calibration, more intelligent, flexible control

Read more less

1. Easy to install, easy to use2. Strong and durable material, not easy to damage3. Effective protection of the lens, does not affect the use4. Applicable models: for DJI O3 sky end5. Use: lens module housing frame

Read more less

1. Easy to install, easy to use2. Strong and durable material, not easy to damage3. Effective protection of the lens, does not affect the use4. Applicable models: for DJI O3 sky end5. Use: lens module housing frame

Read more less

1. Front vision obstacle avoidance module for DJI Inspire 22. Replace damaged or unusable ones with new ones.3. Easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department

Read more less

1. It can achieve a detection distance of 14 meters, and a built-in camera with an equivalent focal length of 30 mm, with a wide field of view of 70 degrees2. When used with the new focus motor, the manual lens can perform automatic focus3. The target recognition and follow-up performance of intelligent follow is even better4. The laser follow focus system not only reduces the difficulty of follow focus when shooting handheld, but also does not need to rely on the texture of the object, and can also focus stably in low-light environments or complex scenes with multiple targets5. It can project 43,200 ranging points, which can meet the focus needs of most scenes6. Measured under no strong light conditions, in a normal shooting environment, the detection distance of people is 7 meters7. Image sensor resolution: touch screen display 448×2988. Field of view: 57.4 degrees (horizontal), 44.6 degrees (vertical), 70.1 degrees (diagonal)9. Equivalent focal length: 30 mm10. ToF sensor resolution: 240×18011. ToF sensor detection distance: 0.5m to 14m12. Support simultaneous recognition of 5 targets (MAX), and you can choose one of them to follow13. Recognition distance: 9 meters14. Power consumption: 6.8 watts15. Input voltage: 7V to 16V16. Dimensions: Length 66mm, Width 57mm, Height 24mm17. Weight: about 130 grams18. Mount height: 30mm19. Calibration-free lens: DZOFILM Vespid Cyber 35/50/75 mmAccessory interface:- Cold shoe interface- 1/4-20 mounting holes- USB-C interface- USB-C power/CVBS/CAN data interfacePacking list:- LiDAR Focus Rangefinder (RS) x 1- Camera Control Cable (USB-C, 30cm) x 1- LiDAR Control Cable (USB-C, 30cm) x 1

Read more less

1. X9 adopts interchangeable mount design, supporting DJI DL mount and Leica M mount.2. The existing ultra-wide angle and f/0.95 super aperture lenses on these mounts can be used on the X9, so you can choose freely according to your shooting needs.3. Support the M-mount lenses in the list of lens adapters4. With the X9 follow focus motor allows manual lenses to achieve manual focus and auto follow focus function5. Packing list: M-mount adapter ring x 1, M-mount camera protection cover x 1, DX-mount lens protection cover x 16. Compatible products: DJI Zenmuse X9-6K, DJI Zenmuse X9-8K

Read more less

1. Dual HDMI and SDI output via expansion module, DC-IN input support and connection to master wheel/sensory controller2. Mounted on the back of the monitor3. To be used with the DJI graphic highlighter controller cable (sold separately)4. Features: SDI and HDMI dual video outputs, DC-IN input5. Suitable for DJI graphic highlight monitorsPacking list.-1 x graphic monitor expansion board-1 x 2mm ball-head hexagonal spanner-4 x M2.5-9mm screws

Read more less

1. Mounted on the bottom of X9 head camera to realize manual focus and auto-focus function of manual lens2. Adjust the focus of manual lens through Ronin 4D and three-channel follow focuser, also can be paired with LiDAR rangefinder to help manual lens achieve auto-focus function3. Applicable products: DJI Zenmuse X9-6K, DJI Zenmuse X9-8K4. Features:- Help manual lens to achieve auto-focus function (with LiDAR laser rangefinder)- Autofocus- Manual focus- Manual focus5. Package list:- X9 follow focus motor x 1- X9 follow focus motor guide 18.5mm x 1- X9 follow focus motor guide 44.5mm x 1- X9 follow focus motor guide 88mm x 1- X9 follow focus motor fixing bracket x 1- Follow focuser follow focus rack x 2- X9 follow focus motor gear x 1- LiDAR rangefinder/following motor cable x 2- M3-6 cup head socket head cap screws x 2- 2.5mm ball-head hexagonal wrench x 1

Read more less

1. Screw fixed, stable and not easy to fall2. With installation tools, easy to use, fast installation3. Use: To solve the problem of not being able to level the pitch axis when pairing the DJI Ronin 4D with a heavy lens4. Packing list: X9 head counterweight x 1, M3-6 countersunk head screws x 4, 2mm ball-head hexagonal wrench x 15. Applicable products: DJI Zenmuse X9-6K, DJI Zenmuse X9-8K6. Weight: about 294g

Read more less

1. Easy to install replacement parts2. Each item is inspected and in good condition before delivery3. Repairing the drone is complicated, please ensure you have professional repair skills or go to a professional repair department4. Compatible products: for DJI RS 3 Mini / RS 3 Pro / RS 3 / RS 2 / RSC 25. Note: The shaft arm knob is only available for the RSC 2Packing list-2 x half moon ring camera fixing screws-2 x axial arm knob for RSC 2-4 x M4 screws (10 mm)

Read more less

1. Easy to install, easy to use2. Strong and durable material, not easy to damage3. Effective protection of the lens, does not affect the use4. Applicable models: for DJI O3 sky end5. Use: lens module housing frame

Read more less

1. Applicable models: DJI O3 FPV Air Unit Module2. Using 3D printing technology, accurate hole position3. Using high-quality materials, durable and not easy to break4. Simple installation, convenient and quick5. Weight: 10g

Read more less

1. Material: plastic2. Stable transmission signal3. Good compatibility4. Not easy to rust, durable5. Suitable for: DJI Air 2S6. Function: responsible for the transmission of image transmission signals7. Weight: 10g

Read more less

1. Single item accessory of the map transfer module for maintenance and replacement, without coaxial cable and camera, quick release design for quick replacement.2. Dimensions: length 32.5 mm, width 30.5 mm, height 14.5 mm3. Weight: about 28 grams4. Communication frequency:-2.400-2.4835 GHz (receive signal only)-5.725-5.850 GHz (receive and transmit signals)5. Transmitted power (EIRP):-FCC: less than 33 dBm-CE: less than 14 dBm-SRRC: less than 30 dBm6. Operating ambient temperature: -10 -40 degrees Celsius7. Transmission distance: 10 km (FCC), 2 km (CE), 6 km (SRRC)

Read more less

1. Dual-band dual-polarized omni-directional antenna with strong anti-interference capability for long-distance transmission.2. Equipped with I-PEX connector, small size and light weight.3. Adapted products: for DJI O3 Air Unit4. Weight: about 3 grams5. Length: 85 mmPacking list: DJI O3 Air Unit Antenna × 1

Read more less

1. The highest image quality of 1080p/100fps, the picture transmission can transfer up to 10 km clearly and smoothly, with a bit rate of up to 50Mbps and latency as low as 30 milliseconds, and support H.265 video encoding, revolutionizing the image transmission experience.2. 1/1.7-inch sensor for 155-degree ultra-wide angle 4K/60fps video with ultra-clear image quality for richer detail and 20GB built-in storage; D-Cinelike color mode for detailed color adjustment and a camera module that can be used with Avata ND mirror kit (8/16/32).3. Canvas mode compatible: support Canvas mode and customize the OSD information displayed on the Goggles 2 and FPV Goggles V2 screens, as well as adjust the PID parameters yourself, thus enhancing the playability of the whole system.4. Lightweight body has wider compatibility, allowing flexible combination assembly. The Goggles 2 and DJI FPV Remote 2 are also smaller in size, reducing the overall storage volume and making them easier to carry around.5. Compatible products: for DJI Goggles 2/DJI FPV Goggles V2/DJI FPV Remote Control 2Packing list:O3 Air Unit Camera Module ×1O3 Air Unit Graphic Transmission Module ×1O3 Air Unit Antenna ×1O3 Air Unit 3-in-1 connection cable ×1

Read more less

1. Quickly connectable to the air unit module interface2. Power and signal cables are marked with different colors3. Easy to assemble and disassemble, lightweight design4. Length: 100 mm5. Adapted products: for DJI O3 Air Unit

Read more less

1. Use with DJI O3 Air Unit for repair and replacement.2. Dimensions: length 21.2 mm, width 20 mm, height 19.5 mm3. Weight (including coaxial cable): about 8.3 grams4. Coaxial cable length: 115 mm5. Image sensor: 1/1.7-inch image sensor, effective 48 million pixels6. Lens: Field of view (FOV): 155 degrees7. Equivalent focal length: 12.7 mm8. Actual focal length: 2.34 mm9. Aperture: f/2.810. Focusing mode: FF11. Focus range: 0.6 m to infinity12. ISO range: 100-6400 (auto), 100-25600 (manual)13. Shutter: Rolling shutter14. Video resolution:-with Goggles 2: 4K-50/60fps, 2.7K-50/60/100fps, 1080p-50/60/100fps-with FPV Goggles V2: 4K-50/60fps, 2.7K-50/60/100/120fps, 1080p-50/60/100/120fpsVideo format: MP4Packing list:DJI O3 Air Unit camera module × 1Coaxial cable ×1Screws (M2×4) ×4

Read more less

1. Applicable models: DJI O3 FPV Air Unit Module2. Using 3D printing, accurate hole position3. Using M2 metal nuts, strong and durable4. Installation specification: 20x205. Screw compatibility: M26. Size: 37.5 x 20mm8. Weight: 5.5gPacking list: -3D snap x 2pcs-M2 hexagonal nuts x 4 pcs

Read more less

1. Applicable models: DJI O3 FPV Air Unit Module2. Using 3D printing, accurate hole position3. High-quality plastic M3 nuts, durable and not easy to break4. Installation specification: 20x205. Screw compatibility: M36. Size: 37.5 x 20mm8. Weight: 5.5gPacking list: -3D snap x 2pcs-M3 hexagonal nuts x 4 pcs

Read more less

1. Applicable models: DJI O3 FPV Air Unit Module2. Using 3D printing technology, accurate hole position3. Using high-quality materials, durable and not easy to break4. Simple installation, convenient and quick5. Weight: 10g

Read more less

1. Shock absorbing plate for DJI INSPIRE 2 2. Replace damaged or unusable ones with new ones.3. Easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair department

Read more less

1. Made of high quality material, which is both reliable and durable, very sturdy.2. Repair accessories for accidental damage replacement, making maintenance more worry-free.3. Compact design of GPS data cable, very easy to wire on small drones.4. Easy to install, remove and wire for Air 2S drone.5. Material: plastic + electronic components6. Weight: about 3g

Read more less

1. Double layer quick release plate for DJI RS 3 Mini design, using Arca standard, easy to switch between photo tripods2. The upper quick release plate retaining edge design, can effectively prevent the screws and camera loose3. Easy to use, easy to install4. Made of high quality materials, sturdy and durable5. Applicable products: DJI RS 3 Mini6. Packing list:- RS Mini quick release plate x 1- Half-moon ring camera fixing screw (inch 1/4-20) x 1- Fixing screw (inch 1/4-20) x 1

Read more less

1. For DJI Zenmuse X9-6K; DJI Zenmuse X9-8K2. The Zenmuse X9 gimbal camera can use the L-mount lens group through the L-mount component3. The X9 adopts a replaceable bayonet design, which not only supports the DL bayonet independently developed by DJI, but also supports the L bayonet4. Some lenses of the L mount support functions such as aperture adjustment and automatic focus, and creators can freely choose according to shooting needs5. Weight: about 120 grams6. Bayonet structure width: length 97 mm, width 80 mmPacking list:- L-mount adapter ring x 1- L-mount camera protective cover x 1- DX mount lens protection cap x 1

Read more less

1. Material: metal2. Applicable models: for DJI Inspire 23. The original machine mold opening, precise hole position4. Easy to install, equipped with screws5. Two motors, you can choose according to your needs6. Product weight: 140 grams7. Packing: OPP+bubble bag

Read more less

1. Material: metal2. Applicable models: for DJI Inspire 23. The original machine mold opening, precise hole position4. Easy to install, equipped with screws5. Two motors, you can choose according to your needs6. Product weight: 140 grams7. Packing: OPP+bubble bag

Read more less

About the product1. Replacement Parts for DJI Zenmuse H3-3D Gimbal Camera. 2. The ribbon cable comes with the adhesive on it already. 3. Thickness of the same cable as original ribbon cable. 4. Replace your broken or unusable item with a new one. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended.

Read more less

1. Gimbal camera flex cable for DJI Inspire Pro Zenmuse X5 2. Completely fit and work 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. Frequency: 5000-6000MHz 2. Gain: 3dbi 3. VSWR: 4. Polarization:RHCP 5. Axial Ratio: 0.7 6. Cable: RG141 7. Weight: 6.8g 8. Diamension: Total length: 60mm, cable length:45mm 9. Interface: RHCP SMA / LHCP RP-SMA

Read more less

1. Gimbal camera flex cable for DJI Inspire 1 Zenmuse X3 2. Completely fit and work 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less